1, High efficiency (18%-20%) poly silicon cells ( high qulity) for
long term output stability.
2, Strictly quality control ensure the stablity and reliability of
each piece of the solar panels from Kelan.
3, High transmittance low iron ermpered glass with enhanced
stiffness and impact resistance.
4, Both poly and mono crystalline for options.
5, Outstanding electrical performance under high temperature and
6, Excellent performance in harsh weather.
Description of every parts:
1. Junction Box in proof-water with TUV Certificate
2. Bypass Diode Rated 45V&15A
3. Solar Cable & Connector: 4m² MC 4connector with TUV Certificate
4. Toughed Glass: The glass is super white cloth grain of toughened
glass , the thickness of 3.2mm , the solar cell spectral response
range of wavelengths (320-1100 nm), light transmittance over 91% ,
Ultraviolet light radiation , light transmittance is not
falling.Toughened glass is made of components can withstand 25 mm
in diameter of hockey hit at a speed of 23 m/s.
5. EVA: 0.5 mm thickness with high quality EVA film as sealant of
solar cell and and the connection between the glass, TPT agent.
With high light transmittance and anti-aging ability. Solar cell
encapsulation of EVA film after curing performance requirements:
Light transmittance is greater than 91% ; Crosslinking degree is
during from 70 to 90% ; Peel strength (N/cm), glass/film is more
than 30 ; TPT/film is more than 15 ; Temperature resistance is from
- 40° C to 85° C.
6. TPT BackSheet: the back of the solar panel, ageing resistance ,
corrosion resistance , resistance to ultraviolet radiation,
airtight, etc. Basic requirements.
7. Frame: aluminum alloy frame with high intensit , mechanical
shock resistance ability.Strong, lightweight aluminum frame design
with reinforced sealing and load hold to prevent freezing and
warping, and stand against high wind.
|Solar Panel Parameters||OL-30W-M|
|Optimized working voltage||21.6V|
|Optimized working current||1.69A|
|Open circuit voltage||18V|
|Short circuit current||1.78A|
|Operating temperature||-40℃ to+85℃|
|Maximum system voltage||1000VDC(IEC)/600VDC(UL)|
|Series fuse rated value||20A|
|Solar panel dimension||650*350*23mm|
|Glass specification||3.2mm(0.13inch) tempered glass|
|Frame||Anodised aluminium alloy|
|Rated operating temperature||45±2℃|
|Pmax temperature parameter||-(0.48±0.05)%/℃|
|Voc temperature coefficient:||-(0.34±0.1)%/℃|
|Isc temperature coefficient||0.04±0.01%/℃|
|Notic:Data under standard testing condition
25-year limited warranty of 80% power output;
10-year limited warranty of 90% power output;
5-year limited warranty of materials and workmanship.
Features of the solar street light:
1. Very easy to install, IP65 Waterproof and stunning quality for
outdoor and indoor flood light.
2. Provide bright and wide beam distribution light for general
purpose flood night lighting.
3. Energy-saving and Eco-friendly, no any pollution to environment.
4. High efficiency, low light decay.